Sign Out
Directions for use: 1. Remove the cover.
2. Firmly grasp the base of the inhaler and, to open it, turn the mouthpiece in counterclockwise direction.
3. Remove the capsule from the bottle and put it in the internal compartment in the base of the inhaler. It is important that the capsule is only removed from the bottle immediately before using the inhaler.
4. Turn the mouthpiece to the closed position.
5. Press the buttons completely only once, holding the inhaler upright. Release the buttons.
6. Release as much air from your lungs as possible.
7. Place the mouthpiece of the inhaler in your mouth and close your lips around it. Tilt you head slightly down (approximately 45°). Inhale quickly and as deeply as possible. You should hear a vibration as the capsule spins in the internal compartment dispersing the medicinal product.
Note: If you do not hear the sound of the capsule spinning, it may be stuck; in this case, open the internal compartment again, detach the capsule and repeat the procedure.
8. Hold your breath while counting in your head to 10 (about 10 seconds); remove the inhaler from your mouth, then breathe normally. Open the inhaler and see if there is still powder residue in the capsule. If there is still powder, repeat steps 4 to 8.
9. After use, open the inhaler, remove and discard the empty capsule. Close the mouthpiece and put the cover back.
Important: Wash your mouth with water and/or brush your teeth immediately after using the medicinal product.
Cleaning: Once per week, you should clean the outside of the mouthpiece with a dry cloth. Never wash the inhaler, since its contents are sensitive to moisture. Never lend you inhaler to another person.
