Luprodex Caution For Usage

Procedure for Reconstitution: Use Aseptic Technique Throughout.
Do not use Sterile Water for Injection or Sodium Chloride Injection (Saline) for reconstitution in place of the recommended diluent provided in the pack.
1. Visually inspect the vial. Vial should not be used if clumping or caking is evident. A thin layer of powder on the wall of the vial is considered normal. The diluent in the ampoule should appear clear.
Ensure that the fluid is at the bottom section of the ampoule (flick or tap lightly if need be).
Hold the ampoule and snap open the ampoule.
2. Use luer lock syringe with 22 gauge needle provided in the pack.
Fix needle in luer lock till it rotates no more.
Withdraw 1 ml of diluent from the ampoule.
3. Remove plastic seal cap of vial by flicking it off.
4. Inject diluent into the vial.
5. Shake well the contents of vial for thorough Dispersion.
The suspension will appear uniformly milky.
6. Withdraw entire contents of the vial back in the syringe.
Inject intramuscularly/subcutaneously.
Discard the remainder of the diluent, the ampoule and the vial.